Pto Switch; Pto Switch - Kioti DS4110 Manual

4
 ds4110(hs) / ds4510(hs)
-
CAUTION
If the hazard lamps are turned

on for an extended period of
time while the engine is stopp-
ed, the battery can be discha-
rged. Therefore, use them only
in emergency.
The hazard lamp can be oper-

ated without the key inserted.
M50-EU-04.indd 8

PTO SwITCh

(1) pto switch

(a) oFF (b) on
the pto switch is used to supply
power from the tractor to the imple-
ment.
Make sure to put this switch into the
"oFF" position before starting the en-
gine. otherwise, the engine cannot
be started.
the rear pto rotates at 540 rpm
when the engine speed is approx.
2,600 rpm.
CAUTION
To avoid personal injury and ac-
cident:
before disassembling or clean-

in g t h e P TO s y s t e m , m a k e
sure that the PTO switch is in
the "OFF" position, the engine
is stopped, and all parts are
stopped.
Always keep the PTO driv-

H61O409A
ing part clean. Also, check the
PTO cover is closed while PTO
is in operation.
Disengage the PTO while driv-

ing the tractor on the public
road.
b e c a r e f u l n o t t o g e t y o u r

hand, foot, cloth, or hair into
any driving part while the PTO
is in operation. You can be se-
verely injured.
M a k e s u r e t h a t n o o n e i s

around the tractor and imple-
ment while the PTO is in oper-
ation.
2009-10-08 오전 8:46:23