Kioti DS4110 Manual page 153

7
- Ds4110(hs) / Ds4510(hs)
There are marks for the fuse capac-
ity and location on the cover of the
fuse panel. replace the fuse accord-
ing to the following procedure:
1. Turn the key switch to the "oFF"
position and turn off all the electri-
cal devices.
2. open the fuse box cover and
check the fuse in question using
fuse tongs.
M50-EU-07.indd 34
3. if the fuse is blown, replace it with
a new fuse with same capacity.
Make sure it is firmly installed.
4. install the fuse box cover.
WARNING
Never use a fuse with the ca-

pacity higher than specified on
the fuse box cover.
If using a faulty fuse, steel

wire, or foil, the electrical de-
vice can be damaged or even
can catch a fire.
NOTE
H11O655A
If the replaced fuse is blown

soon, it is probable that the
wiring system is faulty. In this
case, contact your local KIOTI
Dealer.
If the relay or other electrical

component is faulty, contact
your local KIOTI Dealer.
2009-09-28 오후 6:11:52