Pre-Operation Check; Pre-Operation Check - Kioti DS4110 Manual

5 5
  dS4110(HS) / dS4510(HS) dS4110(HS) / dS4510(HS)
- -

PRE-OPERATION CHECK

It is a good practice to know the con-
dition of your tractor before you start
it. you should do routine check be-
fore each use.
CAUTION
Park the tractor on the level

ground, stop the engine, and
apply the parking brake before
checking or repairing it.
Refer to "DAILY CHECKING
ITEM" in the section 7 "MAIN-
TENANCE" for pre-operation
check.
Be sure to read and under-

stand the information titled as
"DANGER", "WARNING", and
"CAUTION" thoroughly for the
safe operation.
M50-EU-05.indd 2
CHECK ITEM
Walk around inspection.

Engine oil level.

Transmission oil level
.

Coolant level.

Clean the front grill and radiator

screen.
Air cleaner element.

Brake pedal free play.

All dash gauges and indicators.

Head lights, tail lights, and work-

ing lights.
Accessible wiring harness for any

damage.
Seat belt and ROPs for damage.

All "dANGER" and "WARNING"

decals.
Fuel level.

Tire pressure and wheel bolt tight-

ening condition.
3-point hitch and secure pins.

For detailed information, refer to
"maintenance schedule chart" in
chapter 7.
INITIAL OPERATION
driving a new tractor at a high speed
or under heavy load can affect its du-
rability.
make sure to run the tractor at the
proper work load and speed for the
initial operation of 10 to 20 hours.
TIPs fOR BREAKING-IN
1. Start the engine and idle the en-
gine at a low speed for 3 to 4 min-
utes in advance.
2. Increase the idling time in cold
weather.
3. do not drive the tractor at the
maximum speed on a road.
4. Never apply excessive load during
work.
5. Idle the engine at a low speed for
2 to 3 minutes before stopping it.
2009-09-28 오후 6:13:14