Manaras Opera MGH Installation Instructions Manual page 29

Commercial & industrial very heavy duty worm gear operator (for sectional doors, rolling doors and grilles), electrical control (board 070e)
Table of Contents

Advertisement

Table 8 - Radio Control Functions – 3-Button Transmitter RADIOEM103SD/MD
Transmitter
Modes
Three Button
Transmitter
3 x 1-Button
3-Button
Transmitter
RADIOEM
103SD/MD
For technical support, please call 1-800-361-2260 or visit
29
Functions
1.OPEN → Small Button
2.CLOSE → Medium Button
3.STOP → Large Button
1.DOOR #1 → Small Button
2.DOOR #2 → Medium Button
3.DOOR #3 → Large Button
Each button acts separately as a
1-Button Transmitter (Commercial
Sequence or SBC depends on
operator settings).
Programming
1.Unscrew the screw on the back of the
Transmitter.
2.Insert a flat screwdriver in the rounded
corner of the Transmitter.
3.Pry open the Transmitter's cover.
4.Position jumper on SD (Single Door).
5.Put the Transmitter's cover back-on and
fasten the screw.
6.On ECB, select run mode (1, 4, or 5).
1.Unscrew the screw on the back of the
Transmitter.
2.Insert a flat screwdriver in the rounded
corner of the Transmitter.
3.Pry open the Transmitter's cover.
4.Position jumper on MD (Multiple Doors).
5.Put the Transmitter's cover back-on and
fasten the screw.
6.On ECB, select run mode (1, 4, or 5).
www.manaras.com
for more information

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MGH and is the answer not in the manual?

Related Products for Manaras Opera MGH

Table of Contents