On-Board Radio Receiver; Radio Receiver Components And Compatible Transmitting Devices; Programming Instructions - Manaras Opera MGH Installation Instructions Manual
Commercial & industrial very heavy duty worm gear operator (for sectional doors, rolling doors and grilles), electrical control (board 070e)
Table of Contents
Advertisement
8
On-Board Radio Receiver
The On-Board Radio Receiver is factory installed on all operators equipped with an Electronic Control Board
BOARD 070 and features Rolling Code Technology.
8.1
Radio Receiver Components and Compatible Transmitting Devices
ANTENNA
Each Receiver is compatible with the devices listed below:
Note: You can match 3-Button Transmitters AND 1-Button Transmitters with the same Receiver. Mix and match
accordingly for your application (ordered separately). One receiver will accept up to 50 Transmitters.
RADIOEM 101: 1-Button Opera Brand Transmitter for operation of a Single Door. Can be configured as a
•
traditional commercial sequence or as a Single Button Control (The SBC provides the user with the possibility
to open/stop/close the door by using a single-button radio transmitter (or a single push-button station).
RADIOEM 103 SD: 3-Button Opera Brand Transmitter for operation of a Single-Door
•
(open/stop/close function) (field selectable).
RADIOEM 103 MD: 3-Button Opera Brand Transmitter for operation of Multiple-Doors (open function) (field
•
selectable).
KEYLESS 042: Wireless Entry Transmitter for keyless access to a Single or Multiple-Doors.
•
Other soon to be offered Opera Brand devices; 3-button mini key-chain transmitter, multi-channel receiver,
•
etc...
8.2
Programming Instructions
To MATCH a Transmitter to the Receiver
1.HOLD the Receiver's LEARN button until the LED
flashes (approx. 2 sec.) (frequency of 1 sec. ON /
1 sec. OFF).
2.HOLD any button on the Transmitter until the
Receiver's LED stops flashing.
For technical support, please call 1-800-361-2260 or visit
LED (WHITE)
Radio Receiver Programming Instructions
To DELETE ALL Transmitters from the Receiver memory
27
LEARN
BUTTON
1.HOLD the Receiver's LEARN button until the LED
flashes (approx. 10 sec.) (frequency of 1/3 sec. ON /
1/3 sec. OFF).
www.manaras.com
for more information
Advertisement
Table of Contents
Need help?
Do you have a question about the MGH and is the answer not in the manual?