Load Default Settings; Customizing Rings And Volume; View Status; Diagnose - Escene ES330-PEG User Manual

6.3 Load default settings

If you want to...
Load default settings

6.4 Customizing Rings and Volume

If you want to... Then...
1) Choose "System setting" > "Phone setting" > "Ring type".
Change the ring tone
2) It will auto ringing. Press navigation to choose ring tone.
3)Press OK to set the ring tone,
Press
1) Choose "System setting" > "Phone setting" > "Volume setting".
Adjust the volume
level 2) You can adjust the volume level of following types

6.6 View status

If you want to see the phone status,Press MENU button > "view status" ,or press OK button > "view status", you can see the detail
information of the phone.
If you want to ......
Network
Lines
software
Expansion

6.7 Diagnose

If you want to check the phone hardware function,Press MENU button > "diagnose" ,or press OK button > "diagnose", you can check
the phone item as below.
www.nolto.com
-Mask: enter appropriate subnet mask
-GW: enter appropriate gateway
- DNS1: enter IP address of the primary DNS server
- DNS2: enter IP address of the secondary DNS server
-Web port: the default Web port is 80,if you change it(for example change it to
88),you must use IP and Web port to login the web page (for example
http://192.168.0.200:88).It will take effect on next reboot.
-Telnet port: the default Telnet port is 23,if you change it(for example change it to
2003),you must use IP and Telnet port to login the manage page (for example telnet
192.168.0.200:2003).It will take effect on next reboot.
soft key to cancel
-Ring volume: Phone call ring volume,
-Handset volume: Handle output volume,
-Handset mic volume: Handle input volume,
-Speaker volume: Hands-free speaker output volume,
-Speaker mic volume: Hands-free input volume,
-Headset volume: Headphone output volume,
-Headset mic volume: Headset microphone input volume
Then...
1) Choose "System settings" > "Advanced settings".
2) Enter the password required（The default is empty).
3) Choose "load default settings", and press 'OK', then go
back and press "Reboot" the phone.
Then......
You can see the network detail information of the phone
You can see the SIP account
It include phone Mode software version kernel version
Upgrade date Running time
Can check the expansion, if your phone support this
feature.
Escene Communication
20