Table of Contents
Advertisement
Handset
Hang
up
while
using
Speakerphone
Hang
up
while
using
Headset
Hang up one call, but preserve
another call on the other line
4.4 Using Hold and Resume (Switch Calling Line)
You can hold and resume calls. You can take a call in one line at any time, and the other lines would be hold. As a result of that, you can
switch different calling line on our phone.
If you want to...
Put a call on hold
Hold a line and switch to another
line
Resume a call on current line
Release a call on different line
Tips
• Engaging the Hold feature typically generates music or a beeping tone.
• A held call is indicated by the Yellow green
4.5 Transferring Calls
Transfer redirects a connected call. The target is the number to which you want to transfer the call.
If you want to...
Talk
to
the
transfer
recipient
before
transferring a call
(consult transfer)
Transferred to idle lines or
other
numbers
without
talking
to
the
transfer
recipient
(Blind transfer)
Blind transfer to the
held line
Escene Communication
-or press End
the
Press Speaker button that is Red
-or press Line button for the appropriate line,
-or press End
Press Handset button, （Do not keep the headset mode),
the
-or press End (keep the headset mode)
Press End,
-or refer to the above three methods
Then...
Press HOLD button,
-or press soft key
Press another Line button for the appropriate line
Press Line button,
Select the line want to release hold, press the line, so recovery;
and flashing Line button.
Then...
1) Press TRANSFER button or press XFER.
2) Enter number.
3) press "#" （default),
-or press
then transfer the call,
-or wait five seconds(default)then transfer the call
1) Press TRANSFER button or XFER.
2) Press
;
3) Enter number.
4) Press "#" （default)
-or press
, then transfer the call.
-or wait five seconds(default)then transfer the call
1) Press TRANSFER button or press XFER.
2) Press the Line button of held line
,
13
www.escene.cn/en/
Advertisement
Table of Contents
