Unpack - Gilson PLC 2050 User Manual

Unpack

upon receipt of the instrument, inspect the exterior of all shipping cartons. all cartons
should arrive unopened and undamaged. if examination reveals that damage has occurred in
shipment, notify the carrier, and Gilson immediately. refer to Customer Service on page 19.
WARNING
PLC Purification Systems are delivered with major components already assembled. Keep
the original container and packing assembly in case the instrument must be returned to the
factory.
a pLC purification System weighs approximately 65 kg (143 lbs.) and an additional
CAUTION
10 kg (22 lbs.) with packaging. the system is too heavy to be lifted or moved by one
person safely. to avoid personal injury and for general safety, if moving or lifting the
system, always get another person to assist you. always follow local health and safety
regulations.
Do not attempt to lift the instrument from a valve. always grip it from its base.
to unpack the instrument:
1. open the box.
2. remove the carton of accessories.
3. remove the packing material.
4. Lift the unit out of the box and place it at suitable location, such as a lab bench or cart.
NOTICE
5. Verify that all components from the Unpacking List on page 16 are included.
Do not plug in the instrument if any damage is detected. powering the instrument
in a damaged state may result in serious injury and may damage internal
components of the instrument.
allow sufficient spacing around the system for proper cooling and for the
different connections.
Free spaces of at least 20 cm must be kept around the instrument at all times
to allow for proper tubing and cable connections and to provide adequate
ventilation during operation.
PLC PurifiCation SyStemS | uSer'S GuiDe
15