Service-08-2 Seat Base Spring Repair; Service-08-3 Seat Locking Pin Repair - Invacare Scorpius Series Service Manual

Scorpius
3b.
2.8.2

SERVICE-08-2 Seat Base Spring Repair

Please refer to SERVICE-07 Seat Repair steps first and follow Step 2 of SERVICE-08-1 Seat Base Repair,
then:
1. Remove the seat bar screws
(6 mm, 2 pcs).
2. Take out the seat base
spring.
❖ When reassembling, follow
the exact reverse sequence
of these steps.
• Step 1. When opening the bar spring, be careful not to use too much force which might
damage the spring.
• Step 2. For re-installation, please hook the spring onto the locking plate of the seat base
from below. If it is to be removed, please refer to SERVICE-08-2 Seat Base Spring Repair.
2.8.3

SERVICE-08-3 Seat Locking Pin Repair

Please refer to SERVICE-08-1 Seat Base Repair to remove the seat base, then:
1. Hold in place quick-release screw on backside. Loosen the quick-release screw.
2. Take the quick-release screw out.
3. Remove the top washer.
4. Remove the seat locking pin and spring from the other side of the seat base.
5. Take out the seat spring.
❖ When reassembling, follow the exact reverse sequence of these steps.
1654773~A
Service Manual
3a.
33