Service-01-2 Buzzer Repair - Invacare Scorpius Series Service Manual

Scorpius
2.1.1

SERVICE-01-2 Buzzer Repair

Refer to Service Procedures SERVICE-01 Steering Shroud Repair steps as
follows:
1. Find the buzzer connector (figure on the right)
2. Re-connect the buzzer connector (figure on the right)
3. If it is not effective, go to Buzzer Replacement below.
Buzzer Replacement:
Please refer to Service Procedures SERVICE-01 Steering Shroud Repair steps first, and then:
1. Remove the screws (16 mm, 2 pcs) on the handle and steering head front shroud.
2. Remove the steering head front shroud and set it aside carefully.
3. Remove the buzzer and handle screw (12 mm, 1 pc).
4. Take out the buzzer and replace it with a new one.
❖ After the replacement of parts or re-installation, please follow the exact reverse sequence for reassembly.
❖ If buzzer function is not restored, go to SERVICE-01-1 Top Control Panel Repair.
• Step 1. Use one hand to remove the screws and the other hand to hold the steering head
front shroud to prevent it from falling.
• Step 4. Use one hand to remove the screws and one hand to hold the buzzer to prevent it
from falling.
1654773~A
Service Manual
15