Service-11-4 Rear Fender Repair; Service-11-5 Folding/ Unfolding Board Repair - Invacare Scorpius Series Service Manual

Scorpius
Re-Installation Instructions:
❖ When re-installing the power socket, make sure it is
the right position, see the picture on the right. If the
connector position is incorrect, it will not be possible
to reinstall the battery pack.

2.11.4 SERVICE-11-4 Rear Fender Repair

Please follow the SERVICE-11 Rear Top Shroud Repair steps for removal, then:
1. Disengage the locking pins on both sides of the rear fender and seat bar mechanism.
2. and
3. Remove the screws (12 mm, 4 pcs) on both sides of the rear fender.
4. Pull the rear fender back to separate it from the frame.
5. Take the rear fender off.
❖ For re-installation, follow the exact reverse sequence of these steps.
• Step 4. When the N-D lever is in the D position, the rear fender may not be easy to remove.
Shift the gear to the N position to make removal easier.

2.11.5 SERVICE-11-5 Folding/ Unfolding Board Repair

Complete the steps of SERVICE-11 Rear Top Shroud Repair to remove the shroud, then:
1. Find the folding/ unfolding board inside the Scooter.
2. Remove the two screws holding the board.
3. Take the board out.
❖ For re-installation, follow the exact reverse sequence of these steps.
1654773~A
Service Manual
43