Steering-Column Bracket; Column Mount Bracket; Carriage Bolt (3/8 X 3/4 Inch); Flange Nut (3/8 Inch) - Toro 30667 Installation Instructions Manual

Figure 12
1. On-Off-On rocker switch
2. Horn button
3. Locknut
4. Paddle switch
5. Beacon switch
2. Install the horn decal (Part No. 104-6957) as
shown in Figure 13.
Figure 13
1. Horn decal (Part No. 104-6957)
6. Column bracket
7. Speed nut (2)
8. Flasher module
9. Horn switch
10. Hex socket button-head
screw
7
Installing the
Column-Bracket Assembly
onto the Steering Column
Parts needed for this procedure:
1

Steering-column bracket

1

Column mount bracket

2

Carriage bolt (3/8 x 3/4 inch)

2

Flange nut (3/8 inch)

1

Foam strip

1

Cable tie

g034342
Procedure
1. Install the foam strip on the steering column as
shown in
g034344
1. Steering column
2. Foam strip
3. Column mount bracket
4. Locknut—3/8 inch (2)
9
Figure 14.
Figure 14
5. The cable tie goes through
these slots.
6. Carriage bolt—3/8 x 3/4
inch (2)
7. Column-bracket assembly
g034582