Table of Contents
Advertisement
Figure 30
19.
Plug the wire-harness connector into the light
connector.
20.
Route the left, rear wire harness under the left
side of the traction unit to the left, rear light
(Figure
30).
Figure 31
21.
Plug the wire-harness connector into the light
connector.
22.
Route the wire harness to the registration-plate
light and plug the wire-harness connector into
the light connector
Important:
Secure the wire harness with
cable ties so that it does not contact any hot
or moving parts.
23.
Install any parts that were removed from the
traction unit to route the wire harness.
(Figure
31).
12
Installing the Fuses and
Decal
Parts needed for this procedure:
g034579
3
Fuse (10 A)
1
Fuse (15 A)
1
Fuse-box decal
Procedure
1.
Insert the 3 (10 A) and 1 (15 A) fuses into the
fuse block slot
1. Fuse (10 A)
2. Fuse (10 A)
g029801
2.
Install the fuse-box decal to the storage-box
cover
(Figure
16
(Figure
32).
Figure 32
3. Fuse (10 A)
4. Fuse (15 A)
33).
g029811
Advertisement
Table of Contents
