Toro 30667 Installation Instructions Manual page 4

Drilling the Holes for the Horn
Bracket
Using the dimensions in
holes (7 mm) through both walls of the roller-support
tube.
1. 1.9 cm (3/4 inch)
2. 3.8 cm (1-1/2 inches)
Drilling the Holes in the Front
Footrest for the Brake-Pedal
Switch
Using the dimensions in
holes (7 mm) through the front footrest.
Figure 3, locate and drill 2
Figure 3
3. 25.4 cm (10 inches)
4. 7 mm (9/32 inch) diameter
Figure 4, locate and drill 2
g029796
1. 15.5 cm (6-7/64 inches)
2. 32 mm (1-1/4 inches)
3. 19 mm (3/4 inch)
4
Figure 4
4. 17 mm (11/16 inch)
5. 7 mm (9/32 inch) diameter
g029663