Nut (5/16 Inch); Tail Light Assembly Bracket; Hex-Head Bolt (5/16-18 X 1 Inch) - Toro Outcross 9060 Series Installation Instructions Manual

3
Installing the Rear Lights
Parts needed for this procedure:
4

Nut (5/16 inch)

2 Tail light assembly
2

Tail light assembly bracket

4

Hex-head bolt (5/16-18 x 1 inch)

Procedure
1. Secure the tail light assemblies to the tail light assembly brackets
Note:
Ensure that the yellow lens is on the top of the bracket.
(Figure
Figure 2
3
2).
g274525