Toro 30667 Installation Instructions Manual page 18

Figure 36
Right side shown
1. Plate
14
Connecting the Battery
No Parts Required
Procedure
Connect the battery; refer to your machine Operator's
Manual.
g032311
2. Decals
Operation
Controls
Hazard Switch
Press the hazard switch
to activate the front and rear flashing hazard lights.
1. Turn signal switch
2. Horn button
Turn-Signal Switch
Press down on the left side of the turn-signal switch
(Figure 37) to activate the left-turn signal. The center
position is off.
Press down on the right side of the turn-signal switch
(Figure 37) to activate the right-turn signal. The center
position is off.
Beacon Switch (Optional)
Press the beacon switch
beacon.
Horn Button
Press the horn button
18
(Figure 37) to the O
N
Figure 37
3. Hazard switch
4. Beacon switch (optional)
(Figure 37) to activate the
(Figure 37) to activate the horn.
position
g034583