Other Functions; Sleep Function; Alarm; Setting The Alarm Time - TechniSat DIGITRADIO 600 Instruction Manual

13 Other functions

13.1 Sleep function

> Press the MENU button and select Main menu > Sleep.
If you are in a submenu, select the Main menu as described in Section 5.1.
> With the p or q buttons or SCROLL&SELECT, you can set the period to Sleep off, 15, 30, 45, 60 minutes.
After the time has elapsed, the device switches to any operating mode on standby.
Alternatively:
> Press the SLEEP button device.
A clock symbol appears on the status bar of the display with the time remaining until the DIGITRADIO
switches to standby.

13.2 Alarm

> Press the MENU button and select Main menu > Alarm.
Alternatively:
> Press the ALARM button on the device.
If you are in a submenu, select the Main menu as described in Section 5.1.
46

13.3 Setting the alarm time

The wake-up function cannot be operated until the correct time has been set. Depending on the set-up,
this either occurs automatically or has to be set manually.
The time can either be set manually or updated via DAB/FM or the Internet. See Section 14.3 for further
information.
> Select an alarm time memory (Alarm 1 or Alarm 2) using the q or p buttons or SCROLL&SELECT, and
confirm with OK.
> Go through all the points one after the other.
Confirm each entry with the OK button:
Repeat > Off, Daily, Once, Weekend, Working days.
Time > Set the time you wish to be woken at with the p/q and t/u buttons.
Mode > Buzzer, Internet radio, DAB, FM.
Station > Last listened to or a station you have stored on the number buttons 1-12.
Volume > Using the p/q buttons, select the volume with which you wish to be woken.
> To save the alarm with the settings configured, select Save.
The alarm is active as soon as you have set the alarm repeat to Daily, Once, Weekend, or Working days.
The status bar shows an alarm symbol with the corresponding number of the active alarm
EN
FR
IT
NL
NW
DK
PL
CZ
.
SK
47