TechniSat DIGITRADIO 600 Instruction Manual page 21

9.2.7 Dynamic Label Plus
If supported by the programme provider, the Dynamic Label Plus service also allows, for example, the name of
the current programme or the track and artist to be displayed.
9.2.8 Setting DRC
The compression rate balances dynamic vibrations and thereby any volume variations that occur.
> Press the MENU button and select the Volume adjustment item to select the desired compression rate.
> With the compression rate choose:
DRC high - High compression
DRC low - Low compression
DRC off - Compression switched off.
> Confirm by pressing OK.
9.2.9 Deleting inactive stations
> Press the MENU button and, using p or q, select Delete inactive stations.
> Confirm by pressing OK.
> Using t or u, select Yes and confirm by pressing OK.
9.2.10 Sorting the stations
> Press the MENU button and then use p or q Station sorting.
> Select the sorting type with p or q and confirm your selection with OK.
You can choose between: Alphanumeric, Provider and Valid.
40
10 FM mode
10.1 Switching on the radio mode
> Press the MODE button as often as required until FM radio appears on the display.
Alternatively:
> Press the MENU button and select Main menu > FM.
If you are in a submenu, select the Main menu as described in Section 5.1.
When switching on for the first time, the frequency 87.5 MHz is set.
If you have already set or saved a station, the radio plays the last station set.
Adjust the antenna to improve reception. (Section 4.3.2)
10.2 FM reception with RDS information
RDS is a procedure for broadcasting additional information via FM stations. Broadcasters with RDS might, for
example, broadcast their station name or the programme type. This is shown on the display.
The device can show the following RDS information
RT (Radio text),
PS (Station name),
PTY (Programme type).
10.3 Manual station selection
> Use p, q or SCROLL&SELECT to set the desired station.
The display shows the frequency in steps of 0.05 MHz.
EN
FR
IT
NL
NW
DK
PL
CZ
SK
41