Other Functions; Sleep Timer; Alarm; Setting The Alarm - TechniSat DIGITRADIO 370 CD IR Manual

The playback is controlled on the external device.
Do not set the volume too low to prevent interference.
During AUX input operation, the device remains switched on, even if the
connected audio source is not providing any sound.
The USB port on the DIGITRADIO 370/371 CD IR can also be used to charge or
power external devices. The maximum charging current is DC 5 V, 1 A.

15 Other functions

15.1 Sleep timer

The sleep timer automatically switches the DIGITRADIO 370/371 CD IR to standby
after the set time.
> Press the MENU button and use the / buttons to select the [Main Menu]
>[Sleep] item.
> Press the ENTER button.
> Use / to select a period after which the DIGITRADIO 370/371 CD IR should
switch off. You can choose between Off, 15, 30, 45 and 60 minutes.
> Press ENTER to apply the setting.
Alternatively the SLEEP
scroll through the times.
When the sleep timer is active, a moon symbol appears on the display
showing the time still available.

15.2 Alarm

The alarm switches on the DIGITRADIO 370/371 CD IR at the set alarm time. 2 alarm
times can be programmed. The description of how to programme Alarm 1 serves as
an example.

15.2.1 Setting the alarm

> Press the Alarm 1/2 button (17) on the remote control.
Alternatively:
> Press the MENU button and use the / buttons to select the [Main Menu]
>[Alarm] item. Then press the ENTER button.
> Use / to select the alarm you want to set and press the ENTER
button.
> The specific alarm parameters can then be set.
Repeat
76
button (18) can be used. Press it repeatedly to