TechniSat DIGITRADIO 600 Instruction Manual page 22

10.4 Automatic station selection
> Press SCAN to start the automatic scan. The station frequency runs upwards on the display.
or
> Keep p or q pressed in FM mode for approx. 2 seconds to automatically search for the next station with
a strong enough signal.
If a FM station with sufficient signal intensity is found, the scan stops and the station is played. If an RDS station is
received, the station name, and possibly radio text, appears.
Please use manual station selection for setting weaker stations.
In Menu > Scan setting you can set whether the scan only finds strong stations (Strong stations only). To
do so, press the MENU button and Scan settings.
Confirm the selection with OK.
10.5 Setting mono/stereo
> Press the MENU button and, using p or q, set the Audio setting item.
> Select YES or NO to play stations with weak FM reception in mono only.
> Confirm by pressing OK.
10.6 Saving FM stations
The station memory can save up to 12 stations in the FM range.
> Select the desired station
> Press one of the number buttons 1-12 and keep it pressed for a few seconds. "Saved" appears on the
display.
> Repeat the procedure to save additional stations.
42
Alternatively:
> During playback keep the PRESET button on the device pressed for approx. 5 seconds until the "Save
preset" menu appears.
> Now rotate SCROLL&SELECT to select a memory slot and press SCROLL&SELECT to save.
10.7 Selecting the programmed stations
> Press the desired number button 1-12. If no station is saved on the selected programme slot, "Memory
slot empty".
Alternatively:
> Press the PRESET button on the device and use SCROLL&SELECT to select the desired station.
If no station is saved to the selected programme slot, "Memory slot empty" appears.
10.8 Deleting a saved memory slot
> Simply save a station to one of the memory slots.
11 Bluetooth
11.1 Activating the Bluetooth mode
> Press the MODE button as often as required, until Bluetooth appears on the display.
Alternatively:
> Press the MENU button and then select Main menu > Bluetooth.
In the status bar on the display, a flashing indicates the pairing mode.
EN
FR
IT
NL
NW
DK
PL
CZ
SK
43