Audio Input; Other Functions; Sleep Timer - TechniSat DIGITRADIO 370 CD BT Instruction Manual

> The second programming slot (P02) is then active. Proceed as described
above to save a track to programming slot 2. Do this to save the tracks you
want to all the programming slots.
> Press the Play/Pause
Press Stop, change the source or remove the USB medium to delete the
programming.

11 Audio input

You can play sound on an external device via the DIGITRADIO 370/371 CD BT speaker.
> Connect the external device to the AUDIO IN port (17, 3.5 mm jack) on the
back of the device.
> Use the MODE button to select the audio input. [AUX In] appears on the
display.
The playback is controlled on the external device.
Do not set the volume too low to prevent interference.
In AUX In mode, the device remains switched on - even if the attached audio
source is not providing a signal - and switches to standby after 4 hours.
The USB port on the DIGITRADIO 370/371 CD BT can also be used to charge
or power external devices. The maximum charging current is DC 5 V, 1 A.

12 Other functions

12.1 Sleep timer

The sleep timer automatically switches the DIGITRADIO 370/371 CD BT to Standby
after the set time.
> Press the MENU button and use the / buttons to select the [Sleep] item.
> Press the ENTER button.
> Use / to select a period after which the DIGITRADIO 370/371 CD BT should
switch off. You can choose between Off, 15, 30, 45, 60 and 90 minutes.
> Press ENTER to apply the setting.
Alternatively the SLEEP
scroll through the times.
When the sleep timer is active, a moon symbol appears on the display
showing the time still available.
70
button to play the programmed tracks.
button (17) can be used. Press it repeatedly to