TechniSat DIGITRADIO 600 Instruction Manual page 20

9.2.2 Selecting stations
> To listen to a station use the p or q, buttons or SCROLL&SELECT and then press OK or SCROLL&SELECT.
> To select a station press OK.
Alternatively:
> Press the MENU button and, using p or q, select the Station list item.
9.2.3 Saving DAB stations
The programme memory can save up to 12 stations in the DAB range.
The saved stations remain stored even in the event of a power cut.
> Select the desired station
> Press one of the number buttons 1-12 and keep it pressed for a few seconds. "Saved" appears on the
display.
> Repeat the procedure to save other stations.
Alternatively:
> During playback keep the PRESET button on the device pressed for approx. 5 seconds until the "Save
preset" menu appears.
> Now rotate SCROLL&SELECT to select a memory slot and press SCROLL&SELECT to save.
9.2.4 Selecting the programmed stations
> Press the desired number button 1-12. If no station is saved on the selected programme slot, "Memory
slot empty".
38
Alternatively:
> Press the PRESET button on the device and use SCROLL&SELECT to select the desired station.
9.2.5 Deleting a saved station
> Simply save a new station to the memory slot of a station you no longer require.
By retrieving the factory settings, all memory slots (among other things) are deleted.
9.2.6 Signal intensity
> Press the INFO button as often as required until the signal intensity is shown.
> The bar modulation shows the current level.
In the case of stations with a signal intensity below the required minimum signal intensity, adjust the
antenna, if required, as described in Section 4.3.2.
Minimum signal
intensity
Signal intensity
EN
FR
IT
NL
NW
DK
PL
CZ
SK
39