Gbic Optic Ethernet Ports; Installing A Gbic Optical Port - Siemens RUGGEDCOM RSG2100 Installation Manual

SFP Transceiver
RUGGEDCOM SFP1132-1LX40
RUGGEDCOM SFP1132-1LX70
RUGGEDCOM SFP1132-1LX100
RUGGEDCOM SFP1132-1LX115
a
MM = Multi-Mode, SM = Single-Mode
b
The RUGGEDCOM RSG2100 supports only 100/1000 Mbit/s.
4.4

GBIC Optic Ethernet Ports

GBIC (Gigabit Interface Converter) optic Ethernet ports are available with SC (Stan-
dard or Subscriber Connector) connectors.
1
1
2
Figure 4.9
4.4.1

Installing a GBIC Optical Port

To install a GBIC optical port, do the following:
Explosion hazard – risk of serious personal injury and/or equipment damage
Do not install or remove GBIC optical ports when an explosive atmosphere is
present.
Electrical hazard – risk of damage to equipment
Use only components certified by Siemens with RUGGEDCOM products. Damage to
the module and device may occur if compatibility and reliability have not been prop-
erly assessed.
RUGGEDCOM RSG2100
Installation Manual, 03/2020, C79000-G8976-1040-17
6GK6000-8FG57-0AA0
6GK6000-8FG54-0AA0
6GK6000-8FG55-0AA0
6GK6000-8FE56-0AA0
Tx Connector
Rx Connector
SC Port
WARNING
CAUTION
Order Code Speed (Mbit/s)
2
Communication Ports
4.4 GBIC Optic Ethernet Ports
a
Mode
1000 SM
1000 SM
1000 SM
1000 SM
Nomi-
nal Dis-
tance (km)
40
70
100
115
27