Sfp Transceivers; Gbic Optic Ethernet Ports - Siemens SIMATIC NET RUGGEDCOM RSG2300P Installation Manual

1
1
2
Figure 4.7
For specifications on the available fiber optic Ethernet ports, refer to
Ethernet Port Specifications (Page
4.4

SFP Transceivers

The RUGGEDCOM RSG2300P supports up to two Small Form-Factor Pluggable (SFP)
transceiver sockets, which are compatible with a wide array of SFP transceivers
available from Siemens.
LEDs
Each socket features an LED that indicates its link state.
Yellow (Solid)
Yellow (Blinking)
Off
Compatible SFP Transceivers
For more information about which SFP transceivers are compatible with the
RUGGEDCOM RSG2300P, as well as instructions for ordering and installation/
removal, refer to the
support.industry.siemens.com/cs/ca/en/view/109482309]".
IMPORTANT
Only use SFP transceivers approved by Siemens for RUGGEDCOM products. Siemens
accepts no liability as a result of performance issues related in whole or in part to
third-party components.
4.5

GBIC Optic Ethernet Ports

GBIC (Gigabit Interface Converter) optic Ethernet ports are available with SC
(Standard or Subscriber Connector) connectors.
RUGGEDCOM RSG2300P
Installation Manual, 04/2022, C79000-G8976-1047-18
Tx Connector
Rx Connector
SC Port
State
"RUGGEDCOM SFP Transceiver Catalog [https://
2
1
Tx Connector
1
Rx Connector
2
Figure 4.8
33)".
Link established
Activity
No link detected
Communication Ports
4.4 SFP Transceivers
2
ST Port
"Fiber Optic
Description
27