Table of Contents
Advertisement
Communication Ports
4.3 SFP Transceivers
For specifications on the available fiber optic Ethernet ports, refer to
Ethernet Port Specifications (Page
4.3
SFP Transceivers
The RUGGEDCOM RSG2200 supports up to two Small Form-Factor Pluggable (SFP)
transceiver sockets, which are compatible with a wide array of SFP transceivers
available from Siemens.
LEDs
Each socket features an LED that indicates its link state.
Yellow (Solid)
Yellow (Blinking)
Off
Compatible SFP Transceivers
For more information about which SFP transceivers are compatible with the
RUGGEDCOM RSG2200, as well as instructions for ordering and installation/
removal, refer to the
support.industry.siemens.com/cs/ca/en/view/109482309].
IMPORTANT
Only use SFP transceivers approved by Siemens for RUGGEDCOM products. Siemens
accepts no liability as a result of performance issues related in whole or in part to
third-party components.
4.4
GBIC Optic Ethernet Ports
GBIC (Gigabit Interface Converter) optic Ethernet ports are available with SC
(Standard or Subscriber Connector) connectors.
1
1
2
Figure 4.7
26
State
RUGGEDCOM SFP Transceiver Catalog [https://
Tx Connector
Rx Connector
SC Port
33)".
Link established
Activity
No link detected
2
"Fiber Optic
Description
RUGGEDCOM RSG2200
Installation Manual, 04/2021, C79000-G8976-1043-17
Advertisement
Table of Contents
