Table of Contents
Advertisement
Communication Ports
4.5 GBIC Optic Ethernet Ports
Yellow (Blinking)
Off
Compatible SFP Transceivers
For more information about which SFP transceivers are compatible with
the RUGGEDCOM RSG2100PF, as well as instructions for ordering and
installation/removal, refer to the
support.industry.siemens.com/cs/ca/en/view/109482309].
IMPORTANT
Only use SFP transceivers approved by Siemens for RUGGEDCOM products. Siemens
accepts no liability as a result of performance issues related in whole or in part to
third-party components.
4.5
GBIC Optic Ethernet Ports
GBIC (Gigabit Interface Converter) optic Ethernet ports are available with SC
(Standard or Subscriber Connector) connectors.
1
1
2
Figure 4.10
4.5.1
Installing a GBIC Optical Port
To install a GBIC optical port, do the following:
Electrical hazard – risk of damage to equipment
Use only components certified by Siemens with RUGGEDCOM products. Damage
to the module and device may occur if compatibility and reliability have not been
properly assessed.
Electrical hazard – risk of damage to equipment
26
State
Tx Connector
Rx Connector
SC Port
NOTICE
NOTICE
Activity
No link detected
RUGGEDCOM SFP Transceiver Catalog [https://
2
Description
RUGGEDCOM RSG2100PF
Installation Manual, 07/2021, C79000-G8976-1345-11
Advertisement
Table of Contents
