Table of Contents
Advertisement
14. G2 T
S
P
I
ECH
PEC AND
ATENT
NFO
Physical size: The unit, without the power supply, will fit in a container with inside
dimensions of 44cm X 13cm X 7.8cm.
Supply Voltage.
9V DC @ 500mA. We recommend TheGigRig Generator power supply ONLY to be used with
G2.G2 doubles the voltage internally to 18V DC
Input impedance 2.2M Ohm
Out 1 - Signal path with input and output amps OFF – True Bypass
The Guitar is AC coupled directly to the amplifier through 300R resistance.
Out 1 is earthed and must be connected to ground at all times.
Out 2 - Signal path with input and output amps OFF – Buffered and Isolated
The Guitar is connected to the amplifier through a Laser Trimmed Precision Buffer and audio
Isolation transformer to remove earth loop hum.
Out 2 is isolated and phase reversible.
Input signal handling Maximum = 19.4V peak to peak in true bypass.
Signal Bandwidth in true bypass = 4Hz to 75KHz (measured at 19V peak to peak)
Input signal handling Maximum.
10.8V peak to peak in true bypass.
Signal Bandwidth
20Hz to 82KHz (measured at 1V peak to peak)
Noise. 4.7nV per root Hz
Input Amplifier/Buffer
Minimum gain X0.001= -30dB
Maximum Gain X4 = +16dB
Bandwidth at 1V = 28Hz to 150KHz.
Buffer output impedance 300R
Noise. 4.7nV per root Hz
Gain control steps = 256 (Log corrected)
Output Amplifier/Buffer
Minimum gain -24dB
Maximum Gain X3.5= +10dB
Bandwidth at 1V = 28Hz to 150KHz.
Buffer output impedance 300R
Noise. 6.5nV per root Hz
Gain control steps = 256 (Log corrected)
This specification is subject to change without notice. Consult our Web site for
amendments.
www.thegigrig.com
© TheGigRig Ltd 2013
3 5
Hide quick links:
Advertisement
Table of Contents
