Back View - GigRig G2 User Manual

9. POST GAIN LEVEL INDICATOR – This is a visual reference on where you POST GAIN
volume is set. Remember that no matter where it's set, it needs to be activated by
pressing the POST GAIN ON button (number 7).
10. Effects Loops – These effects loop buttons are where you program the effects that you
want to have turned on for a particular sound.
11. PRE GAIN ON – This button will turn on the PRE GAIN feature for this pre-set. This
circuit is BEFORE the effects loops. Press and hold for 3 seconds to find UNITY GAIN.
12. PRE GAIN VOLUME SELECT – These two UP and DOWN buttons allow you to
precisely set the level of PRE gain. Hold the button down to increase rapidly, or press
individually for fine tuning.
13. PRE GAIN LEVEL INDICATOR – This is a visual reference on where you POST GAIN
volume is set. Remember that no matter where it's set, it needs to be activated by
pressing the POST GAIN ON button (number 7)
14. TUNER/AUX – This turns on the tuner output on the back panel of G2. You can have
any preset set up as your tuner out.
15. TheGigRig LOGO – This backlit logo tells you that the power is on and will also let you
know when you are in the HIDDEN PRESET. Go to any preset, you will see the red LED
light up saying that you are on that pre-set. Now press it a second time and you are in
the HIDDEN PRESET, at the same time the logo will turn blue to indicate that you are in
the hidden preset. You can set this up as a bypass, or a tuner, anything you like. You
can also DISABLE this feature so the second press simply stays on the preset by
powering up while holding down footswitch 14.
1. INPUT – Plug your guitar in here
2. 2. TUNER/AUX OUT – Connect your tuner here. The TUNER/AUX button on the top
panel of G2 activates the TUNER/AUX output.
3. EFFECTS LOOPS SEND – These SEND jacks are connected to the INPUT of your
pedal. Loops 1~9 are mono sends, and loop 10 has stereo sends. If you are only using a
mono pedal, use the 10m send
4. EFFECTS LOOPS RETURN – This is where you connect the OUTPUT of your effects.
Loops 1~8 have mono returns while loops 9 & 10 both have stereo returns.
© TheGigRig Ltd 2013
6