Control Features; Tuner/Aux; B) Pre Gain; C) Post Gain - GigRig G2 User Manual

Advanced switching system

Hide thumbs Also See for G2:

Table of Contents

5. C

ONTROL

a) TUNER/AUX

This function allows you to set up ANY preset as your tuner. Simply connect your tuner to the

TUNER/AUX output on the back panel of G2 then go to the preset you want to set up as your

tuner and press the TUNER/AUX button. Now whenever you go to that preset, your signal will

be sent straight to the TUNER/AUX output

The PRE GAIN function on G2 gives you the ability to send a controlled level to the input of the

first effect selected in the chain, OR you can set it up with no effects loops selected and simply

have a buffered clean signal to your amp. Simply press the PRE GAIN button, then the blue LED

will come on indicating that the PRE GAIN circuit is now selected for this pre-set. To find UNITY

gain (where the output level is the same as the input level) simply press and hold the PRE GAIN

ON button for 3 seconds and the level will automatically be set to unity.

Now use the UP and DOWN buttons to select your level. If you press and hold the UP and

DOWN buttons the volume will change quickly. To fine tune simply press the UP or DOWN

buttons momentarily and it will increase incrementally per press. There are 200 increments to

the volume level so you can set it to be exactly the volume you need. Remember, the PRE GAIN

needs to be turned on for the PRE GAIN circuit to work. You can easily tell exactly where your

volume is set by toggling the PRE GAIN button on and off to compare the level with your direct

sound.

With the PRE GAIN off, the circuit is completely removed from your signal path.

Like the PRE GAIN, the POST GAIN gives you the ability to select a volume level but this time it is

AFTER your effects. In fact, the POST GAIN circuit is positioned after loop 10 as standard BUT

you can actually position the post gain amplifier AFTER any effects loop you like. To reposition

the Post Gain Amplifier simply power up holding down footswitch 5, then press and hold the

effects loop button you want to place the amp AFTER.

Also the VOLUME PEDAL INSERT LOOP is part of the POST GAIN circuit. This insert is a great

place for your volume pedal, or to use with the effects send and return from your amplifier. It

EATURES

1 0

Table of Contents

Show Quick Links

Table of Contents