G2 Special Functions - GigRig G2 User Manual

11. G2 S F
PECIAL UNCTIONS
You can permanently change the way your G2 functions using the Special Functions or SF
menu below. Special functions are simple on/off settings you can change by pressing and
holding the appropriate footswitch, and pressing the PHASE button on G2. These settings will
be memorized even when you remove power from your G2.
Here is a list of special functions, further details of these special functions can be found in this
manual.
Special functions:
Quick Key:
SF1- continuous light show. Buttons locked for security.
SF2- Factory Reset. Hold down 2 and press PHASE, then press and hold 3. All user settings
are lost. Take care!
SF3- Mono/Stereo mode and input buffer. 1=mono, 2=stereo on loop 9 & 10. Aux = Input
Buffer.
SF4- Phase Mode. (Global or Patch) toggle. Memorized
SF5- Volume Insert Point. Select post amp/mixer/vol insert location & software version #
SF6- Test Mode. Test mode all lights and relays on. (0.5A power).
SF7- Midi Mode. In Midi mode you can set up to 3 Midi channel sends on each foot switch.
RMT SW 1=Midi ON, 2=Midi OFF
SF8- Mixer Mode. Toggles 9 right Rtn to mix with out-amp (mixer input) Memorized
SF9- Trails Loop 9. Toggles 9 left to mix with out-amp (trails) Memorized
SF10- Trails Loop 10. Toggles 10 left to mix with out-amp (trails) Memorized
SF11- Mixer Rest. Mixer input trails and midi through. (No other settings are changed.)
SF12- Midi Thru ON. Switch on midi through. for midi control of pedals etc.
SF13- Midi Thru OFF. Switch off midi through. For two unit operation.
SF14- Hidden Preset Mode. Toggles second press bypass on all foot switches
© TheGigRig Ltd 2013
2 6