GigRig G2 User Manual page 14

4. Let's press a standard preset, number 2 which might have loops 1, 3 and 8 selected.
We want to ADD the delay from loop 10 ON TOP of this sound, but don't want to clear
this sound. All we have to do is press preset number one which is set up in STOMP
BOX MODE
Note – when you go to a standard preset, all the STOMP BOX MODE presets will
still have their yellow LED lit telling you that THIS footswitch is set up in STOMP
BOX MODE. When a yellow LED is on, it means the preset is locked. To edit a
STOMP BOX MODE preset you MUST turn STOMP BOX MODE OFF, then edit the
preset, and then turn STOMP BOX MODE back on again
5. Let's add something else. Let's say we have preset 4 set up in STOMP BOX MODE to
change our amps' channel using one of the REMOTE SWITCHES. Kick that in and the
amp channel changes with all of the previous selections still activated.
6. We've built up quite a sound here, now we just want to go back to a simple preset. Easy,
just press any normal preset. This turns off all the added STOMP BOX MODE presets
and takes you straight back to one of your core sounds
The Golden Rule - If a button does not respond, you need to look at the Stomp Light. To edit a
patch you must exit stomp mode. Exit stomp mode by pressing the stomp mode button to turn
off the yellow stomp light and then press the foot switch you want to edit. After editing you can
turn the stomp light back on again.
© TheGigRig Ltd 2013
1 3