Tech Specs - GigRig G3 User Manual

The advanced switching system
Hide thumbs Also See for G3:
Table of Contents

Advertisement

THE ADVANCED SWITCHING SYSTEM

8. TECH SPECS

Physical size: 44cm x 13cm x 7.8cm / 17.3" x 5.1" x 3.07"
Screen size: Approximately 5 x 3.8cm / 1.96"x 1.5"
Weight: 2.4 kgs / 5.29 lbs
Power Requirements:
G3/Atom 9V DC (2.1mm centre neg) @ 850mA
We recommend the use of The GigRig GenX14 or Generator power supply supplied with G3/S/Atom
Input impedance 1M Ohm
Out 1 - Signal path with input and output amps OFF – True Bypass
Out 1 is earthed and must always be connected to ground.
Out 2 - Signal path with input and output amps OFF – Buffered and Isolated
Out 2 uses our own High Def Isolation and is phase reversible.
Input signal handling Maximum = 16.5V dBV peak to peak in true bypass.
Signal Bandwidth = 5Hz to 150KHz (Outs 1&2)
Pre Gain/Buffer and Post Gain Stereo VCA Controlled Output Amplifier/Buffer
Minimum gain -30dBu
Maximum Gain +8dBu
Bandwidth at 1V = 4Hz to 150KHz.
Buffer output impedance 100 Ohms
Noise. 4.7nV per root Hz – really quiet
This specification is subject to change without notice. Consult our Web site for amendments.
www.thegigrig.com
31
THE GIGRIG G3 USER MANUAL

Advertisement

Table of Contents
loading

Table of Contents