Faq's And Set Up Examples; What Are The Dimensions?; Can I Change The Channels Of My Amp With G2?; How Do I Use G2 With My Amps Fx Loop? - GigRig G2 User Manual

FAQ'
13.
There are a load of constantly updated FAQ's on the website but for now here's a few that might help
Q. What are the power requirements? Can I power it with a PP2?
A. G2 requires 0.5 amp 9V DC power. The plug is standard 2.1mm centre NEG. G2 has been
designed to run from TheGigRig Generator power supply which is part of our Modular Power
Supply system. We cannot guarantee G2's performance from any other supply. A PP2 does not
have enough juice t power G2.
Q. What are the dimensions?
A. 43cm x 13cm x 7.8cm. G2 weighs 2 kilos
Q. Can I change the channels of my amp with G2?
A. Yes, check out the REMOTE SWITCHES in section 5 – Control Features
Q. How do I use G2 with my Amps FX LOOP?
A. Like this. PLEASE NOTE, depending on your rig you may want to turn on the Input Buffer using SF3.
See 'Special Functions' above for details.
Q. Can I have a Wet/Dry or a Wet/Dry/Wet set up?
© TheGigRig Ltd 2013
S U E
S AND ET P XAMPLES
3 2