Other Interesting Midi Features; Filtered Midi Through; Reset Using Midi - GigRig G2 User Manual

receives patch change 114, it will recall preset 2 on bank 8. You can press the foot switches
yourself at the same time as well, nothing is locked or suspended.

Filtered Midi Through

The Midi-in signal can be passed to the Midi out of your G2; however, only program changes
will be passed through to the Midi output all other Midi messages will be filtered out. Midi
through can be switched off, for example when connecting two G2 devices together.
The G2 can take in Midi on CH1 and be programmed using foot switch 7 to send out the same
program change on any of 10 Midi channels. If required each foot switch can be programmed to
send its midi on three separate channels.

Other interesting MIDI features.

We have set Midi in CH2 as a do not respond channel. You will see that your G2 has received
the midi word; however, your G2 is programmed to ignore all Midi input commands on this
channel.
Filtered MIDI Through
The Midi-in signal will be passed to the Midi out of your G2; however, only program changes will
be passed through to the Midi output all other Midi messages will be filtered. This filtered Midi
through can be switched off, for example when connecting two G2 devices together. Please see
special functions to switch off Midi through.

Reset using MIDI

Any program change sent to your G2 on Midi CH4 will instigate a soft reset. This is exactly the
same as switching of the power off and then switching it on again. Your G2 will flash then go to
bypass.
© TheGigRig Ltd 2013
2 5