Basic Operation And Effects Loops - GigRig G2 User Manual

4. B O E L
ASIC PERATION AND FFECTS OOPS
G2 is so incredibly easy and intuitive to use. You simply press the footswitch/preset that you
want to set up, then press the Effects Loops and Control Features buttons that you want to link
to that preset, and you're done! Don't look for a store/save button, it's not there. Every time you
press an Effects Loops or Control Features button, G2 remembers what you've pressed and
automatically saves it to whatever preset you're on.
Lets have a look at programing your Effects Loops
On the top panel you'll see the EFFECTS LOOPS buttons. These correspond to the EFFECTS
LOOPS sends and returns on the back panel of G2
Let's look at loop1. The SEND from LOOP1 plugs into the INPUT of the pedal you want in loop1.
Then the OUTPUT of the pedal plugs into the RTN of loop1. Repeat for all the loops. With your
guitar plugged into the INPUT and your amp plugged into the OUT1 try turning on some loops
by pressing the EFFECTS LOOPS BUTTONS.
Your guitar signal travels through any selected effects loops from 1 through 10, right to left
© TheGigRig Ltd 2013
8