Stereo Loops; Changing The Order Of An Effects Loop - GigRig G2 User Manual

Stereo Loops

For lovers of stereo effects, G2 includes 2 stereo EFFECTS LOOPS. Loop 9 has a mono send
and stereo return, loop 10 has a stereo send and stereo return. These are clearly marked on the
back panel. If you are using MONO effects then use the send and returns on the left marked 'M'.
For stereo effects use connect the second stereo connection to the send and returns marked
with 'ST'. G2 automatically detects if the stereo connections are made and when either of these
loops are selected, routes the stereo signal left and right through G2's outputs 1&2.
Once you have selected your combination of effects loops, that combination is automatically
stored. Every time you press a button on G2, every time you select or de-select an effects loop
or control feature, it is stored to whatever preset you are on. Don't look for a store button, there
is one. G2 takes does it all

Changing the order of an effects loop

G2 allows you to change the order of any of the 8 mono loops per preset, and it's so easy. Let's
start with a preset that uses loops 2, 3 and 8. I want to move loop 2 so it comes after 3.
I press and hold loop 2 until it flashes
Now I just select the loop I want it to come before. In this case, I want it before loop 5. Once
selected the two loops that your moved loop now sit between will flash. On this preset loop 2
now sits between loop 4 & 5. (please note that loops only move in preset mode, not stompbox)
To check your loop position press and hold loop 10, to clear press and hold loop 9.
© TheGigRig Ltd 2013
9