Checking System Status; Releasing The Standby Media Server; Disconnecting From The Standby Media Server - Avaya S8100 Series Manual

Upgrading Communication Manager on Avaya S8700 Media Server from R1.x to R3.1

Checking system status

To check the system status:
1. Under Server, click Status Summary.
2. Verify the following information:
Standby Refreshed is set to Yes
●
Standby Shadowing is set to On
●
Duplication Link is set to Up
●

Releasing the standby media server

To release the media server from busyout mode:
1. Under Server, click Release Server.
2. To verify that the standby server is no longer busied out, click Status Summary.

Disconnecting from the standby media server

Disconnect the laptop from the services port on the back of the standby media server.
Connecting to the active media server
If you are on site, connect to the services port on the back of the active media server.
If you are off site, log on to the active media server with the actual IP address of the media
server.
192 Upgrading, Migrating, and Converting Media Servers and Gateways