Logging Off All Administration Applications; Registering Avaya Communication Manager - Avaya S8100 Series Manual

!
Important:
You must be connected to the LSP on which you are upgrading the software.
Important:
You must also restart call processing on any Enterprise Survivable Server (ESS) on which you
stopped call processing before you upgraded software.
Perform the following administration when you connect your laptop to the primary controller
(media server) with SSH.
1. Access the command line interface of the server with an SSH client like PuTTY and an IP
address of 192.11.13.6.
2. Type telnet IPaddress, where IPaddress is the IP address of the S8300 or S8500
LSP, or the S8500 or S8700-series ESS.
3. Log in as craft or dadmin.
4. At the prompt type start -afcn and press Enter to restart call processing on the LSP or
ESS.
5. Repeat for each LSP or ESS.
For more information, see Installing and Upgrading the Avaya G700 Media Gateway and
Avaya S8300 Media Server, 555-234-100, or Using the Avaya Enterprise Survivable Server
(ESS), 03-300428.

Logging off all administration applications

When you complete all the administration, log off all the applications that you used.

Registering Avaya Communication Manager

Follow standard procedures to register the new software.
Post-Upgrade tasks
Issue 2.1 June 2006 249