Migrating from a DEFINITY Server CSI in a CMC to an S8400 Media Server using Xmodem
Resetting the SIPI
●
Enabling control of the SIPI
●
Verifying SIPI translations
●
Verifying SIPI connectivity
●
Verifying the customer data
●
Verifying circuit pack locations
●
Verifying circuit pack insertion
●
Verifying the IP addresses
●
Checking the link status
●
Upgrading firmware
●
Testing the installation
●
Busying out previously busied out trunks
●
Troubleshooting the migration
●
Returning replaced equipment
●
Premigration administration
This migration is a service-affecting event. The CMCs must be turned off to replace the
processor and tone clock circuit packs. Before you turn off the cabinets, you must perform the
following premigration administration.
Connecting to the processor
To connect to the processor:
1. Connect the computer that you use to access the cabinet.
2. Start a SAT session using Native Configuration Manager or Avaya Site Administration.
3. Log in as craft.
392 Upgrading, Migrating, and Converting Media Servers and Gateways
on page 407
on page 408
on page 408
on page 409
on page 409
on page 409
on page 410
on page 410
on page 410
on page 411
on page 411
on page 412
on page 412
on page 411