Viewing Training Log Records; Settings Configured With The Application; Run Timing Precautions - Casio 3475 Operation Manual

11.
Use (A) and (D) to select the item you want
to in the currently selected display area.
[SPLIT TIME] Split time
[DISTANCE] Running distance
[PACE] Pace
[LAP TIME] Lap time
[LAP DISTANCE] Lap distance
[LAP PACE] Lap pace
[AVG.PACE] Average pace
[SPEED] Speed
[AVG.SPEED] Average speed
[CALORIES]* Calories burned
[HR] Heart rate
[AVG.HR] Average heart rate
[GRADE] Grade
[ALTITUDE] Altitude
[ASCENT] Total ascent
[DESCENT] Total descent
[ASC PACE] Ascent pace
[DSC PACE] Descent pace
[TIME] Time
[DATE] Day
* While heart rate measurement is
enabled, calories burned are calculated
based on your heart rate and shown on
the display.
If you want to change the contents of
●
another display area, press (E) and then
select the display area you want.
Repeat steps 9, 10, and 11 above as
required.
12.
Press (C) to complete the setting
operation.
After the setting operation is complete,
[SETTING COMPLETED] will appear for
a few seconds, and then the RUN FACE
setting screen will re-appear.
13.
Press (E) twice to exit the setting screen.
Note
You can also use G-SHOCK MOVE to
●
customize display screen items.
Operation Guide 3475
Settings Configured with the
Application
Some Training Function settings can be
configured using either watch operations or G-
SHOCK MOVE, while some settings must be
configured using G-SHOCK MOVE.
Settings that can be configured on the
watch or using G-SHOCK MOVE
Customization of screens displayed during
●
run timing
GPS enable/disable
●
GPS receive interval
●
Alert enable/disable
●
Distance display type (horizontal, surface)
●
Distance unit
●
Auto Lap Timing enable/disable
●
Auto Pause enable/disable
●
Settings that can be configured using G-
SHOCK MOVE only
Auto Lap display screen:
●
[AVG](Average Heart Rate) +[SPLIT TIME]
(Split Time) or [MAX](Maximum Heart Rate)
+[DISTANCE](Lap Distance)
Altitude checkpoints
●
Alert calories burned interval
●
Alert time interval
●
Alert altitude interval
●
Auto Lap Timing distance
●

Run Timing Precautions

After using the Training Function, use the
●
charger cable to charge the watch.
Charging with the Charger Cable
l
Viewing Training Log
Records
Your watch stores data (log records) acquired
during run timing. There is enough memory to
store up to 100 log records.
You can tell how much storage space is
available by checking the
During run timing
●
Indicator: Meaning:
Storage space
Displayed
available
Flashing Storage space low
Flashing Storage memory full
Not during run timing
●
Indicator: Meaning:
Storage space
None
available
Displayed Storage space low
Displayed Storage memory full
Training Log Data Accuracy
Training log values are calculated based on
●
step count, calories burned, heart rate,
VO2MAX, and other data picked up by the
watch's sensors. No guarantees are made
concerning the statistics and values
calculated by this watch, so they should be
used as general reference information only.
indicator.
28