Stopwatch; Using A Programmable Timer; Measuring Elapsed Time - Casio 3475 Operation Manual

3.
Use (A) and (D) to specify the number of
timer repeats (Auto Repeat).
4.
Press (C).
5.
Use (A) and (D) to specify the position of
the timer in the sequence.
To setup the first timer, setup
●
[WORKOUT_1].
Timer sequence
6.
Press (C).
This causes the cursor to appear at the
minutes setting of the first timer.
7.
Use (A) and (D) to change the minutes
setting.
Minutes
8.
Press (C).
This causes the cursor to move to the
seconds setting of the first timer.
9.
Use (A) and (D) to change the seconds
setting.
10.
Press (C).
11.
Use (A) and (D) to select whether or not
you want to save your current settings.
[YES] Saves current settings.
[NO] Discards current settings.
Returns to the number of
[RETURN]
repeats setting.
Operation Guide 3475
12.
Press (C) to complete the setting
operation.
After the setting operation is complete,
[SETTING COMPLETED] will appear for
a few seconds, and then the Timer Mode
screen will re-appear.
13.
Repeat steps 2 through 12 as many times
as necessary to configure the settings of
the other timers.
Note
To exit the program setting operation
●
at any point, press (E) and advance to
step 11.
You can use G-SHOCK MOVE to
●
change [WORKOUT_1] and other
timer names to something else. A timer
name can include a combination of up
to 14 alphabetic letters (A to Z),
numbers (0 to 9), and symbols.

Using a Programmable Timer

1.
Enter the Timer Mode.
Navigating Between Modes
l
2.
Press (C) to start the timer countdown.
To pause an ongoing timer countdown,
●
press (C). You can reset a paused
countdown to its start time, by pressing
(E).
When there is a multiple timer
●
countdown operation in progress, you
can immediately terminate the current
Seconds
countdown and start the next
countdown by holding down (A) for at
least two seconds.

Stopwatch

The stopwatch can be used to perform 1-
second unit elapsed time measurement up to
99 hours, 59 minutes, 59 seconds.
It can also measure split times.

Measuring Elapsed Time

1.
Enter the Stopwatch Mode.
Navigating Between Modes
l
2.
Use the operations below to measure
elapsed time.
Start
C
Stop
C
C Resume
Stop
C
Hour, minute, second
3.
Press (E) to reset the stopwatch to all
zeros.
44