Acquiring Gps Location Information Manually; Acquiring Gps Time Information Manually - Casio 3475 Operation Manual

Acquiring GPS Location
Information Manually
You can use a button operation to acquire
GPS location information and adjust your time
zone, time, and day settings in accordance
with your current location.
Note
GPS signal reception requires large
●
amounts of power. Perform it only
when necessary.
1.
Move to a location appropriate for signal
reception and point the LCD of the watch
straight up at the sky.
2.
Enter the Timekeeping Mode.
Navigating Between Modes
l
3.
Hold down (A) for at least two seconds.
This displays the Timekeeping Mode
setting screen.
Pointer
4.
Use (A) and (D) to move the pointer to
[TIME ADJUSTMENT].
5.
Press (C).
6.
Use (A) and (D) to move the pointer to
[AUTO].
7.
Press (C).
8.
Use (A) and (D) to move the pointer to
[TIME+POSITION (GPS)].
Operation Guide 3475
9.
Press (C).
This starts location information
acquisition.
The acquired information will appear on
●
the watch display when location
acquisition is successful.
[RECEIVING FAILED] will appear on
●
the display if location information
acquisition fails for some reason.
10.
Press (C) to complete the setting
operation.
If the receive operation fails, pressing
●
(C) will return to the screen in step 6.
Press (E) twice to return to the
Timekeeping Mode.
Note
Receive normally takes anywhere
●
from about 40 to 80 seconds.
It can take as long as 13 minutes when
●
leap second information is included.
You may experience location
●
information acquisition problems when
you are in the vicinity of a city
borderline.
The watch's time and day will not be
indicated correctly if the time zone
setting is not right for your location. If
this happens, move to a location near
the center of the city you want to set as
your Home City and acquire location
information again. Or you can perform
a time information receive operation to
adjust time and day settings after
configuring Home City and summer
time settings manually.
Acquiring GPS Time Information
l
Manually
Setting a Home Time City
l
Configuring the Summer Time
l
Setting
Acquiring GPS Time Information
Manually
You can use a button operation on the watch
to receive GPS signal time information. When
the receive operation is successful, the
watch's Home City (time zone), day, and time
settings will be adjusted accordingly.
Note
GPS signal reception requires large
●
amounts of power. Perform it only
when necessary.
1.
Move to a location appropriate for signal
reception and point the LCD of the watch
straight up at the sky.
2.
Enter the Timekeeping Mode.
Navigating Between Modes
l
3.
Hold down (A) for at least two seconds.
This displays the Timekeeping Mode
setting screen.
Pointer
4.
Use (A) and (D) to move the pointer to
[TIME ADJUSTMENT].
5.
Press (C).
6.
Use (A) and (D) to move the pointer to
[AUTO].
7.
Press (C).
8.
Use (A) and (D) to move the pointer to
[TIME (GPS)].
12