Operation Guide 3459/3461 Before Getting Navigating Between Modes Solar Charging Started... Press (C) to cycle between modes. This watch runs on power supplied from a rechargeable (secondary) battery that is In any mode, hold down (C) for about one This section provides an overview of the watch ●...
Operation Guide 3459/3461 Low Battery Charging Time Guidelines Power Saving Function ● ● ● A low battery will cause [LOW] to flash and will The table below shows guidelines for Leaving the watch in a dark location for about disable the functions below.
Operation Guide 3459/3461 Selection of More Than 300 World Time Referring to the information below, configure Time Adjustment Using a Cities the time setting in accordance with the method Time Signal Configuring World Time Settings that suits your own lifestyle.
Operation Guide 3459/3461 Appropriate Signal Reception Time Signal Reception Ranges Auto Time Signal Receive Location Time calibration signal reception is supported An automatic time calibration signal receive in the areas shown below. operation is performed and the time and day...
Operation Guide 3459/3461 If the receive operation is successful, the ● Note Hold down (A) for about two seconds until time and day settings will be adjusted [HT] flashes. automatically in accordance with the Home When a receive operation is City and summer time settings.
Summer time In Google Play or the App Store, search for the receive or connection with a phone may cause CASIO “G-SHOCK Connected” app and problems, you can perform the procedure install it on your phone. below to disable it. To re-enable auto time...
Operation Guide 3459/3461 Triggering Immediate Time Adjustment Auto Time Adjustment ● Configuring Reminder The watch’s time setting will be adjusted Settings You can configure watch settings to connect automatically whenever you establish a with a phone at preset times each day and connection between the watch and a phone.
Operation Guide 3459/3461 Selecting a World Time City Configuring the Summer Time Setting Swapping Your World Time and Home ● ● ● Time Y Tap the “G-SHOCK Connected” icon. Y Tap the “G-SHOCK Connected” icon. Y Tap the “G-SHOCK Connected” icon.
Operation Guide 3459/3461 Changing the Home City Recording Your Current X If the watch is in any mode besides the Location (TIME & PLACE) Summer Time Setting Timekeeping Mode, hold down (C) for about two seconds to enter the You can use the procedure below to record Timekeeping Mode.
Operation Guide 3459/3461 Reminders Disconnecting from a Phone Connection Pressing any button will terminate a Bluetooth If you use G-SHOCK Connected to record an Connecting with a Phone connection and return to the Timekeeping appointment, anniversary, or some other Mode.
Operation Guide 3459/3461 World Time World Time City Setting Swapping Your Home City Time and World Time World Time lets you look up the current time You can specify up to five cities as your World in any one of 39 cities around the globe, and Time favorites.
Operation Guide 3459/3461 Stopwatch Configuring Alarm Settings Enabling/Disabling an Alarm or the Hourly Time Signal The stopwatch can measure elapsed time up Use (D) to display the alarm screen (alarm to 23 hours, 59 minutes, 59 seconds (24 number [1] to [4] or [SNZ]) whose setting Use (D) to display the item whose on/off hours).
Operation Guide 3459/3461 Timer Measuring a Split Time Timing the First and Second Place Finishers The timer counts down from a start time specified by you. A beeper sounds when the end of the countdown is reached. The beeper is muted in the cases described ●...
Operation Guide 3459/3461 Using the Timer Auto Light Configuring the Auto Light Setting If Auto Light is enabled, display illumination will turn on automatically whenever the watch Enter the Timekeeping Mode. is positioned at an angle of 40 degrees or more Navigating Between Modes when it is dark.
Operation Guide 3459/3461 Other Settings Changing the Date Display Use (D) to select a language. Format This section explains other watch setting you [ENG]: English can configure. [ESP]: Spanish You can select either month/day or day/month [FRA]: French as the date display format.
Operation Guide 3459/3461 In the aircraft, before arriving at your Configuring Power Saving ● Press (C) twice. destination Function Settings This causes the seconds to flash. Swap the origin time zone time with the destination time zone time. Hold down (A) for about two seconds until [HT] flashes.
Operation Guide 3459/3461 Other Information The information in the above table is current ● Summer Time Summer Time as of January 2018. City Name Start This section provides non-operational Time zones may change and UTC ● 02:00, last information you also need to know. Refer to...
Measuring unit: 1 second For information about phones that can Legal Precautions ● Countdown range: 24 hours connect with the watch, visit the CASIO This watch complies with or has received Setting unit: 1 second ● website. approval under the radio laws of various Time up: 10-second beeper https://world.casio.com/os_mobile/wat/...
Auto receive of signals by the watch is Bluetooth SIG, Inc. and any use of such or day is wrong. disabled while it is connected with a marks by CASIO Computer Co., Ltd. is phone. under license. Adjust time and day settings manually.
Page 21
Home Screen, tap the “G-SHOCK For information about supported phone Connected” icon. Then on the watch, hold Phone-Watch Connection models, visit the CASIO Website. down the MODE button (C) for about three seconds. https://world.casio.com/os_mobile/wat/ I can’t establish a connection Did you install G-SHOCK Connected on between the phone and watch.
Page 22
Operation Guide 3459/3461 Changing to a Different The watch does not connect with a phone and adjust its time when I Phone Model press (D). The watch will not adjust its time if you press Connecting the current watch to (D) while a timer countdown operation is in another phone.