Specifying The Barometric Pressure Unit; Specifying The Temperature Unit; Barometric Pressure Reading Precautions; Temperature Reading Precautions - Casio 3475 Operation Manual

Specifying the Barometric
Pressure Unit
You can specify either hectopascals (hPa) or
inches of mercury (inHg) as the display unit for
barometric pressure values.
Important!
When Tokyo (TOKYO) is the Home
●
City, the altitude unit is fixed as
hectopascals (hPa) and cannot be
changed.
1.
Enter the Timekeeping Mode or
Barometer/Temperature Mode.
Navigating Between Modes
l
2.
Hold down (A) for at least two seconds.
This displays the mode setting screen.
Timekeeping Mode
Temperature Mode
Pointer
3.
Use (A) and (D) to move the pointer to
[UNIT].
4.
Press (C).
5.
Use (A) and (D) to move the pointer to
[BAROMETER].
6.
Press (C).
7.
Use (A) and (D) to select a barometric
pressure unit.
[HECTOPASCAL] Hectopascals (hPa)
[INCH OF Inches of mercury
MERCURY] (inHg)
8.
Press (C) to complete the setting
operation.
After the setting operation is complete,
[SETTING COMPLETED] will appear for
a few seconds, and then the
measurement unit setting screen will re-
appear.
9.
Press (E) twice to exit the setting screen.
Operation Guide 3475
Specifying the Temperature
Unit
You can select either Celsius (℃) or
Fahrenheit (℉) as the temperature display
unit.
Important!
When Tokyo (TOKYO) is the Home
●
City, the unit is fixed as Celsius (℃) and
cannot be changed.
1.
Enter the Timekeeping Mode or
Barometer/Temperature Mode.
Navigating Between Modes
l
2.
Hold down (A) for at least two seconds.
This displays the mode setting screen.
Timekeeping Mode
Barometer/
Pointer
3.
Use (A) and (D) to move the pointer to
[UNIT].
4.
Press (C).
5.
Use (A) and (D) to move the pointer to
[THERMOMETER].
6.
Press (C).
7.
Use (A) and (D) to select a temperature
unit.
[CELSIUS]
[FAHRENHEIT] Fahrenheit (°F)
8.
Press (C) to complete the setting
operation.
After the setting operation is complete,
[SETTING COMPLETED] will appear for
a few seconds, and then the
measurement unit setting screen will re-
appear.
9.
Press (E) twice to exit the setting screen.
Barometer/
Temperature Mode
Celsius (°C)
Barometric Pressure and
Temperature Reading
Precautions
Barometric Pressure Reading
●
Precautions
The barometric pressure graph produced
●
by this watch can be used to obtain an idea
of upcoming weather conditions. However,
this watch should not be used in place of
precision instruments required for official
weather prediction and reporting.
Pressure sensor readings can be affected
●
by sudden changes in temperature.
Because of this, there may be some error in
the readings produced by the watch.

Temperature Reading Precautions

●
Body temperature, direct sunlight, and
humidity all have an effect on temperature
readings. To help ensure more accurate
temperature readings, remove the watch from
your wrist, wipe it dry of any moisture, and
place it in a well-ventilated location not
exposed to direct sunlight. You should be able
to take temperature readings after about 20 to
30 minutes.
Timer
The timer counts down from a start time
specified by you. The watch performs a sound
and/or vibration operation when the end of the
countdown is reached.
The watch will not perform a sound and/or
●
vibration notification operation while the
battery level indicator shows
lower.
or
42