Using The Watch In A Medical Facility Or Aircraft; Switching Between 12-Hour And 24-Hour Timekeeping; Use (A) And (D) To Move The Pointer To - Casio 3475 Operation Manual

14.
Press (C).
This moves the cursor to the day setting.
15.
Use (A) and (D) to change the day setting.
16.
Press (C).
17.
Use (A) and (D) to select whether or not
you want to save your current settings.
[YES] Saves current settings.
[NO] Discards current settings.
Returns to the hour setting
[RETURN]
screen.
18.
Press (C) to complete the setting
operation.
After the setting operation is complete,
[SETTING COMPLETED] will appear for
a few seconds, and then the time
adjustment screen will re-appear.
19.
Press (E) twice to exit the setting screen.
Note
To exit the current time setting
●
operation at any point, press (E) and
advance to step 17.
Operation Guide 3475
Switching between 12-hour and 24-
●
hour Timekeeping
You can specify either 12-hour format or 24-
hour format for the time display.
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Hold down (A) for at least two seconds.
This displays the Timekeeping Mode
setting screen.
Pointer
3.

Use (A) and (D) to move the pointer to

[TIME ADJUSTMENT].
4.
Press (C).
5.
Use (A) and (D) to move the pointer to
[12/24H].
6.
Press (C).
7.
Use (A) and (D) to select [12H] (12-hour
timekeeping) or [24H] (24-hour
timekeeping).
8.
Press (C) to complete the setting
operation.
After the setting operation is complete,
[SETTING COMPLETED] will appear for
a few seconds, and then the time
adjustment screen will re-appear.
9.
Press (E) twice to exit the setting screen.
While 12-hour timekeeping is selected,
●
[P] will be displayed for p.m. times.
Using the Watch in a Medical
Facility or Aircraft
When you are in a hospital, on an aircraft, or
in any other location where radio signals may
cause problems, you can perform the
procedure below to enter the watch's Airplane
Mode, which disables auto GPS signal
receive and connection with a phone. To re-
enable auto time adjustment, perform the
same operation again.
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Hold down (A) for at least two seconds.
This displays the Timekeeping Mode
setting screen.
Pointer
3.
Use (A) and (D) to move the pointer to
[AIRPLANE MODE].
4.
Press (C).
5.
Use (A) and (D) to select an Airplane
Mode setting.
[OFF] Exits Airplane Mode.
[ON] Enables Airplane Mode.
6.
Press (C) to complete the setting
operation.
After the setting operation is complete,
[SETTING COMPLETED] will appear for
a few seconds, and then the Timekeeping
Mode setting screen will re-appear.
7.
Press (E) to exit the setting screen.
is displayed while the watch is in the
●
Airplane Mode.
15