Viewing Training Log Records; Viewing Recorded Log Data Records; Settings Configured With The Application; Viewable Training Log Items - Casio 3481 Operation Manual

10.
Use (A) and (D) to select the item you want
to in the currently selected display area.
[SPLIT TIME] Split time
[DISTANCE] Running distance
[PACE] Pace
[LAP TIME] Lap time
[LAP DISTANCE] Lap distance
[LAP PACE] Lap pace
[AVG.PACE] Average pace
[SPEED] Speed
[AVG.SPEED] Average speed
[CALORIES] Calories burned
[TIME] Time
[DATE] Day
If you want to change the contents of
●
another display area, press (E) and then
select the display area you want.
Repeat steps 8, 9, and 10 above as
required.
11.
Press (C) to complete the setting
operation.
After the setting operation is complete,
[SETTING COMPLETED] will appear for
a few seconds, and then the RUN FACE
setting screen will re-appear.
12.
Press (E) twice to exit the setting screen.
Note
You can also use G-SHOCK MOVE to
●
customize display screen items.
Settings Configured with the
Application
Some Training Function settings can be
configured using either watch operations or G-
SHOCK MOVE, while some settings must be
configured using G-SHOCK MOVE.
Settings that can be configured on the
watch or using G-SHOCK MOVE
Customization of screens displayed during
●
run timing
Alert enable/disable
●
Distance unit
●
Auto Lap Timing enable/disable
●
Auto Pause enable/disable
●
Settings that can be configured using G-
SHOCK MOVE only
Auto Lap screen display item: [SPLIT
●
TIME] or [DISTANCE]
Alert calories burned interval
●
Alert time interval
●
Auto Lap Timing distance
●
Operation Guide 3481
Viewing Training Log
Records
Your watch stores data (log records) acquired
during run timing. There is enough memory to
store up to 100 log records.
You can tell how much storage space is
available by checking the
During run timing
●
Indicator:
Displayed
Flashing Storage space low
Flashing Storage memory full
Not during run timing
●
Indicator:
None
Displayed Storage space low
Displayed Storage memory full
Training Log Data Accuracy
Your watch calculates step counts, calories
●
burned, and other information based on
data picked up by its built-in sensors. No
guarantees are made concerning the
statistics and values calculated by this
watch, so they should be used as general
reference information only.

Viewable Training Log Items

The items below are shown on the Training
Log screen.
[DISTANCE]
[TIME]
[PACE]
[CALORIES]
[CADENCE]
indicator.
Meaning:
Storage space
available
Meaning:
Storage space
available
Running distance
Travel time
Pace
Calories burned
Cadence
Viewing Recorded Log Data
Records
1.
Enter the Training Log Mode.
Navigating Between Modes
l
2.
Press (C).
This displays the training log list.
3.
Use (A) and (D) to move the pointer to the
log data record you want to view.
4.
Press (C).
This displays the selected log data items.
5.
Use (A) and (D) to move the pointer to the
item whose details you want to view.
6.
Press (C).
This displays details about the selected
item.
You can use (A) and (D) to scroll screen
●
contents.
7.
Hold down (D) for at least one second to
return to the Timekeeping Mode.
Note
Pressing (E) during the above
●
procedure will go back one screen.
16