Table of Contents
Advertisement
Specifying the Screen to be
Displayed During Running
(RUN FACE)
You can customize the items on the three
screens can be displayed during run timing
(Training Mode).
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Press (B).
This displays the Training Mode screen.
3.
Hold down (A) for at least two seconds.
This displays the Training Mode setting
screen.
Pointer
4.
Use (A) and (C) to move the pointer to
[RUN FACE].
5.
Press (B).
6.
Use (A) and (C) to select the customize
screen (RUN FACE).
7.
Press (B).
8.
Use (A) and (C) to select the display area
whose contents you want to change.
9.
Press (B).
Watch Operation Guide 3506
10.
Use (A) and (C) to select the item you want
to in the currently selected display area.
[SPLIT TIME]
[DISTANCE]
[PACE]
[LAP TIME]
[LAP DISTANCE] Lap distance
[LAP PACE]
[AVG.PACE]
[SPEED]
[AVG.SPEED]
[CALORIES]
[TIME]
[DATE]
If you want to change the contents of
●
another display area, press (D) and
then select the display area you want.
Repeat steps 8, 9, and 10 above as
required.
11.
Press (B) to complete the setting
operation.
After the setting operation is complete,
[SETTING COMPLETED] will appear for
a few seconds, and then the RUN FACE
setting screen will re-appear.
12.
Press (D) twice to exit the setting screen.
Note
You can also use G-SHOCK MOVE to
●
customize display screen items.
Settings Configured with the
Application
Some Training Function settings can be
configured using either watch operations or G-
SHOCK MOVE, while some settings must be
configured using G-SHOCK MOVE.
Settings that can be configured on the
watch or using G-SHOCK MOVE
Customization of screens displayed during
●
run timing
Alert enable/disable
●
Distance unit
●
Auto Lap Timing enable/disable
●
Auto Pause enable/disable
●
Settings that can be configured using G-
SHOCK MOVE only
Auto Lap screen display item: [SPLIT
●
TIME] or [DISTANCE]
Alert calories burned interval
●
Alert time interval
●
Auto Lap Timing distance
●
Split time
Running distance
Pace
Lap time
Lap pace
Average pace
Speed
Average speed
Calories burned
Time
Day
Viewing Training Log
Records
Your watch stores data (log records) acquired
during run timing. There is enough memory to
store up to 100 log records.
You can tell how much storage space is
available by checking the
During run timing
●
Indicator:
Meaning:
Storage space
Displayed
available
Flashing Storage space low
Flashing Storage memory full
Not during run timing
●
Indicator:
Meaning:
Storage space
None
available
Displayed Storage space low
Displayed Storage memory full
Training Log Data Accuracy
Your watch calculates step counts, calories
●
burned, and other information based on
data picked up by its built-in sensors. No
guarantees are made concerning the
statistics and values calculated by this
watch, so they should be used as general
reference information only.
Viewable Training Log Items
The items below are shown on the Training
Log screen.
[DISTANCE]
Running distance
[TIME]
Travel time
[PACE]
Pace
[CALORIES]
Calories burned
[CADENCE]
Cadence
indicator.
24
Advertisement
Table of Contents
