Configuring World Time Settings; Setting The Alarm; Phone Finder - Casio 3475 Operation Manual

Configuring World Time
Settings
Specifying a World Time City with G-SHOCK
MOVE causes the watch's World Time City to
change accordingly. Settings can be
configured to perform auto summer time
switching for the World Time City.
Make sure that the symbol is shown on the
e
●
watch display when you perform the
procedure below.
If is not displayed, refer to the information
e
●
at the link below.
Connecting with a Phone
l
Note
G-SHOCK MOVE World Time lets you
●
select from among approximately 300
cities as the World Time City.
Selecting a World Time City
●
1. Y
Tap the "G-SHOCK MOVE" icon.
2. Y
On the menu bar, tap "More".
3. Y
Tap "Watch".
4. Y
Select your preferred watch.
5. Y
Select the setting you want to change
and then perform the operation shown on
the screen.
Note
You can use G-SHOCK MOVE to
●
configure settings for user cities that
are not included in the watch's built-in
World Time Cities. You must use G-
SHOCK MOVE to select a user city as
your World Time City.
Operation Guide 3475
Configuring the Summer Time Setting
●
1. Y
Tap the "G-SHOCK MOVE" icon.
2. Y
On the menu bar, tap "More".
3. Y
Tap "Watch".
4. Y
Select your preferred watch.
5. Y
Select the setting you want to change
and then perform the operation shown on
the screen.
"Auto"
●
The watch switches between standard
time and summer time automatically.
"OFF"
●
The watch always indicates standard
time.
"ON"
●
The watch always indicates summer
time.
Note
While the summer time setting is
●
"Auto", the watch will switch between
standard time and summer time
automatically. You do not need to
switch between standard time and
summer time manually. Even if you are
in an area that does not observe
summer time, you can leave the
watch's summer time setting as "Auto".
For information about summer time
●
periods, refer to the "Summer Time
Table".
Summer Time Table
l

Setting the Alarm

Make sure that the symbol is shown on the
e
●
watch display when you perform the
procedure below.
If is not displayed, refer to the information
e
●
at the link below.
Connecting with a Phone
l
1. Y
Tap the "G-SHOCK MOVE" icon.
2. Y
On the menu bar, tap "More".
3. Y
Tap "Watch".
4. Y
Select your preferred watch.
5. Y
Select the setting you want to change
and then perform the operation shown on
the screen.

Phone Finder

You can use phone finder to trigger a sound
on the paired phone to help you find it. The
sound operation is performed even if your
phone is in vibrate mode.
Important!
Phone finder will not sound the tone
●
unless G-SHOCK MOVE is running on
the phone.
Do not use this function in areas where
●
phone call tones are restricted.
The tone sounds at a high volume. Do
●
not use this function when listening to
phone output over earphones.
1. X
Enter the Timekeeping Mode.
Navigating Between Modes
l
2. X
Hold down (A) for at least two seconds.
This displays the Timekeeping Mode
setting screen.
Pointer
19