Using Watch Operations To Adjust The Time Setting; Setting A Home Time City; Configuring The Summer Time Setting; Manual Time Adjustment - Casio 3475 Operation Manual

Using Watch Operations to
Adjust the Time Setting
You can use the procedure below to adjust the
watch's date and time settings manually when
GPS signal reception or communication with
a phone is not possible for some reason.

Setting a Home Time City

●
Use the procedure in this section to select a
city to use as your Home City.
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Hold down (A) for at least two seconds.
This displays the Timekeeping Mode
setting screen.
Pointer
3.
Use (A) and (D) to move the pointer to
[HOME TIME].
4.
Press (C).
5.
Use (A) and (D) to move the pointer to
[CITY].
6.
Press (C).
7.
Use (A) and (D) to move the pointer to the
city you want to use as your Home City.
8.
Press (C) to complete the setting
operation.
After the setting operation is complete,
[SETTING COMPLETED] will appear for
a few seconds, and then the Home Time
setting screen will re-appear.
9.
Press (E) twice to exit the setting screen.
Operation Guide 3475

Configuring the Summer Time Setting

●
If you are in an area that observes summer
time, you can also enable or disable summer
time.
Note
The initial factory default summer time
●
setting for all cities is [AUTO]. In many
cases, [AUTO] lets you use the watch
without switching manually between
summer time and standard time.
In the cases described below,
●
receiving location information by GPS
will cause [AUTO] to be automatically
selected for the summer time setting.
When the time zone of the current
ー
receive operation is different from
the watch's time zone setting prior to
the receive operation.
When the time zone is unchanged,
ー
but the acquired location information
is for a geographic area with
different summer time rules (start
date, end date)
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Hold down (A) for at least two seconds.
This displays the Timekeeping Mode
setting screen.
Pointer
3.
Use (A) and (D) to move the pointer to
[HOME TIME].
4.
Press (C).
5.
Use (A) and (D) to move the pointer to
[DST].
6.
Press (C).
7.
Use (A) and (D) to select a summer time
setting.
Auto switching between standard
[AUTO]
time and summer time
[OFF] Always standard time
[ON] Always summer time
8.
Press (C) to complete the setting
operation.
After the setting operation is complete,
[SETTING COMPLETED] will appear for
a few seconds, and then the Home Time
setting screen will re-appear.
9.
Press (E) twice to exit the setting screen.

Manual Time Adjustment

●
You can use the procedure below to adjust the
watch's time and day settings manually when
GPS signal reception or communication with
a phone is not possible for some reason.
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Hold down (A) for at least two seconds.
This displays the Timekeeping Mode
setting screen.
Pointer
3.
Use (A) and (D) to move the pointer to
[TIME ADJUSTMENT].
4.
Press (C).
5.
Use (A) and (D) to move the pointer to
[MANUAL].
6.
Press (C).
This causes a cursor to appear under the
hour setting.
7.
Use (A) and (D) to change the current time
hour setting.
8.
Press (C).
This moves the cursor to the minute
setting.
9.
Use (A) and (D) to change the current time
minute setting.
10.
Press (C).
This moves the cursor to the year setting.
11.
Use (A) and (D) to change the year setting.
12.
Press (C).
This moves the cursor to the month
setting.
13.
Use (A) and (D) to change the month
setting.
14