Selecting A Timekeeping Mode Digital Display Format; Timer Mode; Stopwatch Mode; Digital Compass Mode - Casio 3475 Operation Manual

Timer Mode

●
The timer counts down from a start time
specified by you. The watch performs a sound
and/or vibration operation when the end of the
countdown is reached.
Timer
l

Stopwatch Mode

●
Use this mode to measure elapsed time.
Stopwatch
l

Digital Compass Mode

●
Use this mode to find north, and to take
direction and bearing angle readings.
Digital Compass
l
Altimeter Mode
●
Use this mode to take an altitude reading for
your current location.
Altitude Measurement
l
Operation Guide 3475
Barometer/Temperature Mode
●
Use this mode to take barometric pressure
and temperature readings for your current
location.
Barometric Pressure and Temperature
l
Measurement
Training Log Mode
●
Use this mode to view recorded training log
data.
Viewing Training Log Records
l
Training Status Mode
●
Use this mode to check your training status.
Viewing Your Training Performance
l
Condition
Notification Mode
●
The Notification Mode receives incoming call,
mail, and SNS notifications and information.
Receiving Phone Notifications
l
Selecting a Timekeeping
Mode Digital Display Format
Each press of (A) in the Timekeeping Mode
cycles display contents as shown below. Note
that you can display the current time along with
one other type of information.
BASIC: Watch Only (Basic Screen)/Activity Start
TIME+DAILY
TIME+STATUS
TIME+MONTHLY
TIME+HR
TIME+WORLD TIME
BASIC: Watch Only (Basic Screen)
Activity Start
Starting a run or some other activity causes
the BASIC screen to change as shown below.
Note
Regardless of what screen is currently
●
displayed, starting an activity causes
the Activity Start screen to appear
(Auto Run Detection). If the displayed
screen is not changed while Auto Run
Timing is being performed, the display
will always return to the BASIC screen
after the Auto Run Timing (Auto Run
Detection) operation is ended.
6